Site last updated: Saturday, November 21, 2026

Log In

Reset Password
Butler County's great daily newspaper

How to care for garden tools

Master Gardener
How to care for garden tools with Master Gardeners

We are tempted to toss our tools into the storage area. However, garden tools that are not cared for properly can develop rust and pitting, causing them to age prematurely, and potentially become a safety hazard.

With good care, your garden tools will be easier to use and last for a longer period of time. This extra care saves you money by not having to replace rusted or broken tools.

Follow these steps to keep your tools in garden-ready condition. Always wear eye protection and gloves when cleaning your tools and work in a well-ventilated area.

The first step is to clean your tools. Rinse them under running water, then scrub with a bristle or wire brush to remove any remaining soil.

Soapy water, alcohol or turpentine can be used to clean tools such as loppers.

A 70% concentration of alcohol has an added benefit of disinfecting tools after cleaning, which prevents the spread of diseases from one plant to another.

Soak the tools in the cleaning solution for at least 30 seconds.

Bleach is not recommended due to its corrosive properties.

After each tool is cleaned and dried, inspect each tool for rust. To remove rust from tools, use steel wool, sandpaper, a wire brush or a wire wheel.

For removing very fine particles of dirt and rust, pour engine oil into a container of sand and dip the tools into the sand. This dip can be covered, stored and used indefinitely.

To prevent rust from developing, apply a penetrating oil, such as WD40, or a soy-based lubricant.

Once tools are clean and rust-free, sharpen your garden tools, which makes them easier and safer to use. Tools must be sharpened to the proper angle, or “bevel.” Axes should be sharpened to a 40 degree angle, hatchets to 35 degrees, and shovels and hoes to 40 -75 degrees.

Common ways to sharpen tools include a mill file or whetstone. A file should only be used in one direction, and only used with the push stroke.

A whetstone is used similarly, but must be lubricated with oil to float the metal shavings from the stone’s surface. A whetstone can create a “burr” on the backside of the tool. Turn the blade over and lightly file off the burr.

Wear heavy leather gloves to protect your hands.

For larger tools, an angled grinder is useful. This power tool is quicker, more efficient, and especially helpful if the tool is dull.

The angled grinder may be a better choice than a file when sharpening lawn mower blades. Clamp and secure tools to prevent them from moving.

Because anvil and bypass pruners have different uses in the garden, their sharpening approaches are different.

Anvil pruners, which are used to prune dead material, have a straight edge. Use the mill file or a whetstone to sharpen them starting at the inside and pushing out. Sharpen both sides.

Bypass pruners are used on living material, and their curved blades “bypass” each other. Use a file or whetstone to sharpen only one blade of the pruner, with a light pass on the other blade to remove the burr.

For tools with joints and hinges, such as pruners, loppers and shears, apply a heavy lubricant, such as white lithium grease or 3 in 1 oil, to keep them operating smoothly.

Once your tools are cleaned and sharpened, apply a light coat of a penetrating oil to protect the newly sharpened edge, and store them in a cool, dry place. Store tools on a pegboard or in a large drum or container. Keep tools off of concrete flooring, to avoid wicking moisture into the metal and causing rust.

For extra protection, add a coating of linseed oil to wooden tool handles. Store fiberglass-handle tools out of sunlight, as sunlight can degrade the fiberglass and create splinters which could lodge into your gloves or hands.

Take extra time to care for your garden tools so the tools can take care of the garden work next season!

For more information on caring for your gardening tools, watch the webinar Fall into Gardening: Care of Garden Tools at https://extension.psu.edu/fall-into-gardening-care-of-garden-tools; the cost is $5.

If you have questions about gardening, call the Butler County Master Gardener Garden Hotline at 724-287 4761, ext. 7, or email the Master Gardeners at butlermg@psu.edu.

Mary Shannon

Mary Shannon is with the Penn State Extension Master Gardeners of Butler County.

More in

Subscribe to our Daily Newsletter

* indicates required
TODAY'S PHOTOS